Seawater Desalination Multiple Bags PP Filter Housing

• Type: Bag Filter Housing
• Usage: Chemical Industry
• Motive Force: Pressure
• Model NO.: PP Filter Housing
• Style: Vertical
• Performance: Efficient Filtration
• Certification: CE
• Filter Bag Size: 180X430mm
• Upper Cover Style: Screw Top Cover
• Main Material: Pph
• Upper Cover Joint: External Tooth PT1/2 Connector
• Protection Switch: Install Protection Switch (Micro Switch Type)
• Transport Package: Carton
• Trademark: INCE
• Origin: China
• HS Code: 8421219990
• Package Size: 80.00cm * 80.00cm * 180.00cm
• Package Gross Weight: 30.000kg

Product Description

 

PPM Series PPH plastic multi-bag polypropylene filter housing is an integrated high-quality plastic filter housing, which is a microfiltration filtration system specially developed for some industrial filtration scenarios such as acid-base liquids and corrosive fluids that cannot be used by stainless steel filter housing. The quick-opening method is adopted for the PPH multi bag filter housing, which is convenient for installation and disassembly, and the sealing performance is good. The plastic multi bag pp filter housing has no joints and solder joints, no dead ends, smooth appearance, no fouling, and easy to clean. PPH multi bag filter housing has wide application range, high filtration efficiency, large flow rate and long service life, help many users save much costs.
 

Product Parameters

Housing Material	PPH(Polypropylene Homopolymer)
Housing Direction	Vertical
Bag Size	Size #2: Φ7"x32"L(Φ180x810mm)
Number of Bag	2pcs, 3pcs, 4pcs
Housing Thickness	22mm
Filtration Rating	1μm - 800μm
Connection	Bottom Port
Inlet/Outlet Type	Flange
Inlet/Outlet Size	DN100
Sealing Type	Swing Bolt Cap With/Without Rocker Arm
Seal Material	Viton

 

 

Product Advantages

1.Strong pressure resistance, large flow rate, high filtration efficiency and long service life.

2.Good sealing, all the sealing rings are made of fluorine rubber, which makes the corrosion resistance better.

3.Suitable for installation of international standard size #2 multi-bags, and international general standard flange.

4.The maximum working temperature of PPH multi bag filter housing is 90°C and the maximum working pressure is 1MPa.

5.PPH multi bag filter housing is suitable for hydrochloric acid with a concentration of 36% and sulfuric acid with a concentration of less than 90%.

Application

1.Desalination

2.PCB Industry

3.Petrochemical

4.Electronics Industry

5.Industrial Wastewater

6.Electroplating Industry

7.Pharmaceutical Industry

8.Printing and Dyeing Industry
 

Performance

Operation Data for PPH Multi-Bag Filter Housing

Max. Temperature	90°C
Max. Pressure	145psi(10bar)
Liquid Flow Direction	Bottom in and bottom out
Flow Rate	2pcs Size #2 (Φ7"x32"): 80m³/h
	3pcs Size #2 (Φ7"x32"): 120m³/h
	4pcs Size #2 (Φ7"x32"): 160m³/h
Filtration Area	Each Filter Bag Size #2 (Φ7"x32"): 0.5

 

Tech Support

Drawing of PPH Plastic Multi-Bag PP Filter Housing

The Method of Replacing The Filter Bags of PPH Multi-bag Filter Housing

1. Stop the pump, close the inlet and outlet valves, and open the drain valve to drain the liquid inside the bag filter housing.

2. Open the upper cover of the filter housing, take out the inner pressure plate of the upper cover and the filter bag pressure ring.

3. Remove the filter bag and clean all parts of the bag filter housing.

4. Reinstall the new filter bag, and put the filter bag into the inner basket, so that the ring mouth of the filter bag is close to the inner wall of the filter housing.

5. Place the bag filter housing pressure ring vertically above the filter bag ring and press the filter bag ring.

6. Place the inner pressure plate of the upper cover on the top of the filter bag and press the sealing ring flatly.

7. Screw the upper cover of the bag filter housing and install the pressure gauge.

8. Close the drain valve, open the inlet and outlet valves, start the pump, and the filtration system is ready to operate.

1. Before use, be sure to clean all sealing rings and sealing ring fixing grooves of the filter, and then place the sealing ring naturally in the sealing ring fixing groove.
2. Place the filter bag into the mesh basket inside the filter, so that the ring of the filter is close to the filter barrel (for barrel wall-sealed filters) or the inner wall of the basket (for basket wall-sealed filters).
3. Place the filter bag pressure ring vertically above the filter bag ring and press the filter bag ring.
4. Place the inner pressure plate of the upper cover on the upper opening of the filter and press the sealing ring flatly.
5. Tighten the filter upper cover to the barrel clockwise.
6. Install the pressure gauge connector and install the pressure gauge.
7. Close the drain valve, open the liquid inlet and outlet valve, and start the pump.
1. Stop the pump operation, close the inlet and outlet valves, open the drain valve, and drain the liquid inside the filter.
2. Rotate counterclockwise to open the upper cover of the filter, and take out the inner pressure plate and filter bag pressure ring of the upper cover.
3. Take out the filter bag and clean all parts of the filter.
4. Reinstall the new filter bag and follow the above usage procedures.

It is strictly prohibited to open the upper cover of the filter while the equipment is running, otherwise it may cause serious casualties.

Hebei Macrokun Mesh Co., Ltd. was established in 2011 and is a professional supplier of screen printing and filtration products. Our main products include screen printing meshes, aluminum frames, screen printing squeegees, printing machines, etc. At the same time, we can also provide a series of filtration products such as filters, liquid filter bags, nut milk filter bags, tea bags, etc. We have a professional work team with many years of experience to help customers handle every problem properly. Our factory is located in Shijiazhuang City, Hebei Province, China, with advanced production equipment and a professional quality control department, which can provide customers with competitive prices and high-quality products. Our R&D department provides strong technical support, which enables us to accept some OEM and ODM projects.
Currently, our products have been exported to more than 70 countries and regions including the United States, Germany, Japan, the United Kingdom, Italy, Russia, Brazil, Turkey, Argentina, Pakistan, Thailand, Singapore, and Mexico.
We have won a good reputation from our customers with our excellent quality and service. We sincerely look forward to cooperating with all our customers and friends to achieve mutual benefit and win-win results, seek greater and better cooperation between us, and provide you with comprehensive and thoughtful services. You are welcome to visit the site for guidance.