15IN1MULTI-FUNCTIONAL
COMBO HEAT PRESS
PRODUCT PARAMETERS
| Brand |
MACROKUN |
| Hot stamping size |
29x38cm/38x38cm |
| Cap heater |
9x15cm |
| Pen heater |
Dia 12&15cm plate |
| Mug heater |
8 sizes |
| Time range |
0-999s |
| Temperature range |
0-250°C |
| Voltage |
110V/220V |
| Package weight |
32KG/34KG |
| Package size |
58*53*52.2cm |
Tough material handle cover,more comfortable, easy to press.
Unique blue light screen touch digital controller, accurate time&temp reading,better user experience.
Thickened heating plate, more stable body, easier to operate.
More even heating, smoother surface, isolate impurities.
FOCUS ON MORE DETAILS
LONG PRESS HANDLE
Longer press handle than other suppliers, prevent scald when
press down.
HAND SCREW KNOB
Very easy to exchange heating elements, no need other tools.
PRESSURE KNOB
Tough material knob, easy to adjust the pressure.
DISTANCE GAP
Higher distance between upper plate and bottom plate, more convenient to place items.
PRODUCT SHOW
PRODUCT DEMONSTRATION
Troubleshooting:
No action after turn on the machine.
- Check the plug whether it connects well or whether it is broken.
- Check the fuse whether it has been burnt out.
- Check the power switch or digital controller whether it is broken.
Indicating light is on but the display screen is black.
Check the 5 cable of railway transformer. The connection is poor if it is loose, just fix it. The transformer may be faulty if the cable is well connected just fix it.
The display screen is working well but the temperature is not heating up.
- Check if the indicating light of solid-state relay is on, if not, please check whether the relay or digital controller is broken.
- The heat platen still can't heating up if you already changed the new solid-state relay, please check whether the heat plate is faulty or the heat plate's power cable is loose, if so,it will need to change a new heat plate.
The temperature is out of control: Set temperature 180°C (356°F),but the actual temperature is above 200°C (392°F)
- It means the solid-state relay is broken, out of control, need to change a new relay.
- Or the digital controller is faulty, need to change controller.
The print color is pale or faded image
The pressure is not high enough or The temperature is too low / pressing time is too short. Please adjust the pressure/ temperature or increase the heating time.
The print color is too Darkened, deep or blurred image
The temperature is too high / or pressing time is too long. Please adjust the temperature or reduce the heating time.
The print color is different/ partial transfer effect is not good enough
Pressing time is too short/ using poor quality transfer paper.
Please increase the heating time or use high quality transfer paper.
The transfer paper stick to the object after transfer
The temperature is too high / use poor quality printing transfer paper Please adjust the temperature or use high quality transfer paper.
Audited Supplier 
){kind=link}