Melt-blown filter elements are formed from pure polypropylene particles through hot melting,
spinning, and traction, and are made into tubular filter elements. Melt-blown filter elements
have a wide range of chemical compatibility and can withstand strong acids and alkalis.
They are widely used filter elements in the liquid filtration industry.
| Product name: |
PP melt blown filter cartridge |
| Filter material: |
PP polypropylene |
| Filter rating: |
1um, 3um, 5um, 10um, 20um, 30um, 60um |
| Length: |
5",10",20",30",40" |
| PH: |
1-13 |
| Pressure difference: |
Forward 0.4Mpa. |
| Working temperature: |
<70ºC under 0.25 Mpa. |
| Sterilization: |
Tolerate 126°C, 30 minutes online steam sterilization. |
| Endotoxin: |
The water extract of the filter column is tested by IAL, and the endotoxin content is less than 0.5 EU/ml |
THREE-LAYER FILTER STRUCTURE
The outer layer is loose and the inner layer is tight.
Each layer can give full play to the better filtering effect.
Features:
1.High filtration efficiency, accurate filter rating, uniform filter cartridge pores.
Up to 85% filtration efficiency.
2.Low filtration resistance, high flow, high dirt holding capacity and long service life.
During the production process, the fiber diameter and gap are adjustable.
The filter cartridge pore is small in inner layers and large in outer layers, which enhances its flow
and dirt holding capacity and makes the filter cartridge is not easily clogged, thereby extending
its service life.
3.High cleanness, no pollution to water quality, great resistant to acids, bases, organic solvents and corrosion.
4.High strength. When the differential pressure between the filter inlet and outlet exceeds 0.4 MPa, the filter cartridge will not deform; when the temperature is greater than 90 °C, the filter efficiency will not be reduced.
5.It has high hydrophilicity after PP treatment and can absorb 10 times the weight of water, so it
can be used in oil and water separation applications.
PLANE BRUSHED DESIGN
The plane design allows a larger area to contact the water source, increasing the contact area by
more than 50%, resulting in greater flow and stronger dirt holding capacity.
TRENCH PROCESS
The fibers are finer, the structure is tighter, the density is higher,
the dirt-holding capacity is stronger, and the purified water flow rate is increased.
NEEDLE PUNCHED GROOVE DESIGN
The groove design allows a larger area to contact the water source, increasing the
contact area by more than 70%, resulting in greater flow and stronger dirt holding capacity.
INTERNAL THREAD STRUCTURE
The filter cotton uses an internal spiral design to increase the filtering area and increase the
pressure resistance of the filter element.
PP Cotton Filter Element
Comparison Chart Of Interception Impurities
About Us
Hebei Ince Environmental Technology Co., Ltd is a professional factory is committed to R&D, design, produce and sales in the field of Products related to filtration field the main products :
Liquid Filter Bags, High Flow Filter Cartridges, Pleated Filters Cartridge, Membrane Filter Cartridges, Melt Blown Filter Cartridges, String Wound Cartridges,Filter Housing,
Activated Carbon Filters Cartridge etc..
Ince high-class filter cartridges are widely used in Pre RO/ID Water Filtration,
Industrial Water Treatment, Chemicals & Solvents, Power Plant Water Treatment, Food & Beverage, Microelectronics, Petrochemical, Pharmaceuticals etc.
Packaging & Shipping:
Packaging:
1. Products are packed by shrink film. It can reduce abrasion when transport.
2. Products are packed by high quality carton, suitable for long distance ocean freight
transportation as well as changing climate and with good resistance to moisture and shocks.
Delivery time:
1. If this kind of products is in stock, the product will be sent for you 1-7days after payment.
2. If this kind of products is not in stock, the products will take about 7-25 days to produce.
Shipping:Maritime; Railway; Air (DHL/UPS/TNT/FEDEX)
Contacts:
If you have interest in any kind of our product, warmly welcome your inquiry.
We will supply our best quality products and service for you.
Audited Supplier 
Melt-blown filter elements are formed from pure polypropylene particles through hot melting,
){kind=link}
){kind=link}