Professional heat transfer,
all done with one machine
| Brand |
MACROKUN |
| Cap Heater |
9*15cm |
| Board Size |
12*12cm |
| Time range |
0-999s |
| Temperature range |
0-250°C |
| Voltage |
110V/220V |
| Package weight |
19KG |
| Package size |
60*57*31CM |
You can adjust the telescopic pressure lever and easily adjust the lever
pressure to achieve a more beautiful printing effect!
The new touch screen design allows you to control the temperature with
just a light touch, making temperature control simple and convenient.
Thickened heating plate, good heating effect, clear hot stamping pattern.
More Attention To Details
Pressure Knob
Adjustable at any time,Easy to use.
Baking Cap Pad
Even force,
Clear ironing.
Toggle Switch
Simple operation,
Easy to use.
Non-slip Base
Sturdy and anti-slip, More convenience.
GAS SPRING
Imported gas spring,longer service life, low defect rate.
PRODUCT DISPLAY
PRODUCT DEMONSTRATION
Troubleshooting:
No action after turn on the machine.
- Check the plug whether it connects well or whether it is broken.
- Check the fuse whether it has been burnt out.
- Check the power switch or digital controller whether it is broken.
Indicating light is on but the display screen is black.
Check the 5 cable of railway transformer. The connection is poor if it is loose, just fix it. The transformer may be faulty if the cable is well connected just fix it.
The display screen is working well but the temperature is not heating up.
- Check if the indicating light of solid-state relay is on, if not, please check whether the relay or digital controller is broken.
- The heat platen still can't heating up if you already changed the new solid-state relay, please check whether the heat plate is faulty or the heat plate's power cable is loose, if so,it will need to change a new heat plate.
The temperature is out of control: Set temperature 180°C (356°F),but the actual temperature is above 200°C (392°F)
- It means the solid-state relay is broken, out of control, need to change a new relay.
- Or the digital controller is faulty, need to change controller.
The print color is pale or faded image
The pressure is not high enough or The temperature is too low / pressing time is too short. Please adjust the pressure/ temperature or increase the heating time.
The print color is too Darkened, deep or blurred image
The temperature is too high / or pressing time is too long. Please adjust the temperature or reduce the heating time.
The print color is different/ partial transfer effect is not good enough
Pressing time is too short/ using poor quality transfer paper.
Please increase the heating time or use high quality transfer paper.
The transfer paper stick to the object after transfer
The temperature is too high / use poor quality printing transfer paper Please adjust the temperature or use high quality transfer paper.
Audited Supplier 
){kind=link}