| Model |
In-outlet
(mm) |
Filter Bag
(mm) |
Filter Area
(m2) |
Housings
capacity/weight
(l/ kg) |
Maximum Traffic
(m3/h) |
Operating
Temperature(ºC) |
Max Pressure
(Mpa) |
| MKF-1A-P |
5Ox50 |
180x430 |
0.25 |
20.3 /15.3 |
20 |
90 |
0.8 |
| MKF-2A-P |
65x65 |
180x810 |
0.5 |
32/24.2 |
40 |
90 |
0.8 |
| MKF-2B-P |
65x65 |
180x810 |
0.5 |
32/24.2 |
40 |
90 |
0.8 |
| MKF-4A-P |
40x40 |
105x380 |
0.12 |
6.5/5.9 |
12 |
90 |
0.8 |
| MKF-4AX-P |
40x40 |
105x380 |
0.12 |
6.5 /41 |
12 |
70 |
0.6 |
| MKF-5A-P |
50x50 |
150x510 |
0.3 |
2.8/10.8 |
22 |
90 |
0.8 |
| MKF-6A-P |
65x65 |
180x560 |
0.35 |
24 / 18 |
25 |
90 |
0.8 |
1. This filter is a bag filter,equipped with a standard 2# filter bag (φ180*810MM), and can also be modified into a 30"*5 cotton core filter.
2. This filter is designed and manufactured in accordance with international standards and can match filter bags of internationally renowned brands (such as EATON, FSI, P ALL, etc.), as well as domestic standard filter bags.
3. The barrel adopts a one-piece design, with a solid and reliable structure without any welding points, completely solving the problem of leakage.
4. It is light in weight and is made of imported PPH raw materials. It has good corrosion resistance against most chemicals. PVDF and ETFE materials have been developed.
5. Contains UV-resistant materials, making it durable and suitable for use in all climates.
6. The design of the hanging ring screw locking upper cover can easily open and lock the bucket cover in a small space, and replace the filter bag quickly and easily.
7. The polished barrel wall design not only prevents the chemical liquid from crystallizing on the barrel wall but also facilitates manual cleaning.
8. There is a sealing design between the filter bag ring and the inner wall of the net basket, and there is also a sealing design between the outer wall of the upper mouth of the basket and the inner wall of the barrel to prevent leakage inside the barrel and meet precision filtration requirements.
9. Suitable for use within the pressure range of 116PSI (8BAR) and the temperature of 176°F (80°C). Can be applied to a wide range of filtration precision from 0.1 to 800 microns.
10. Suitable for use within the pressure range of 116PSI (8BAR) and the temperature of 176°F (80°C). Can be applied to a wide range of filtration precision from 0.1 to 800 microns.
11. The water inlet and outlet are flanged, which is sturdy and durable and can be used with standard pipe flanges of various countries.
12. This filter can be widely used in urban sewage treatment, copper powder recovery, gold recovery, chemical petroleum, bioengineering, pharmaceuticals, electronics, electroplating, industrial wastewater, seawater desalination, printing and dyeing, papermaking and other industries.
1. Before use, be sure to clean all sealing rings and sealing ring fixing grooves of the filter, and then place the sealing ring naturally in the sealing ring fixing groove.
2. Place the filter bag into the mesh basket inside the filter, so that the ring of the filter is close to the filter barrel (for barrel wall-sealed filters) or the inner wall of the basket (for basket wall-sealed filters).
3. Place the filter bag pressure ring vertically above the filter bag ring and press the filter bag ring.
4. Place the inner pressure plate of the upper cover on the upper opening of the filter and press the sealing ring flatly.
5. Tighten the filter upper cover to the barrel clockwise.
6. Install the pressure gauge connector and install the pressure gauge.
7. Close the drain valve, open the liquid inlet and outlet valve, and start the pump.
1. Stop the pump operation, close the inlet and outlet valves, open the drain valve, and drain the liquid inside the filter.
2. Rotate counterclockwise to open the upper cover of the filter, and take out the inner pressure plate and filter bag pressure ring of the upper cover.
3. Take out the filter bag and clean all parts of the filter.
4. Reinstall the new filter bag and follow the above usage procedures.
It is strictly prohibited to open the upper cover of the filter
while the equipment is running, otherwise it may cause serious casualties.
Hebei Macrokun Mesh Co., Ltd. was established in 2011 and is a professional supplier of screen printing and filtration products.
Our main products include screen printing meshes, aluminum frames, screen printing squeegees, printing machines, etc.
At the same time, we can also provide a series of filtration products such as filters, liquid filter bags, nut milk filter bags, tea bags, etc.
We have a professional work team with many years of experience to help customers handle every problem properly.
Our factory is located in Shijiazhuang City, Hebei Province, China, with advanced production equipment and a professional quality control department, which can provide customers with competitive prices and high-quality products.
Our R&D department provides strong technical support, which enables us to accept some OEM and ODM projects.
Currently, our products have been exported to more than 70 countries and regions including the United States, Germany, Japan, the United Kingdom, Italy, Russia, Brazil, Turkey, Argentina, Pakistan, Thailand, Singapore, and Mexico.
We have won a good reputation from our customers with our excellent quality and service.
We sincerely look forward to cooperating with all our customers and friends to achieve mutual benefit and win-win results, seek greater and better cooperation between us, and provide you with comprehensive and thoughtful services. You are welcome to visit the site for guidance.
Audited Supplier 
){kind=link}
){kind=link}