Pph Plastic High Flow Cartridge Filter Housing for Seawater Desalination

Product Description

 

PPH Plastic Multi High Flow Cartridge Filter Housing adopts the method of installing multiple high flow cartridges in the housing shell to meet the water treatment system's demand for larger flow. PPH multi high flow cartridge housing has the characteristics of acid resistance, alkali resistance, high temperature resistance and strong chemical resistance. PPH plastic multi high flow filter housing has the characteristics of longer service life, larger flow rate, good dirt holding capacity and high filtration efficiency. The multi high flow cartridge housing is suitable for strong corrosion filtration where stainless steel filter housing cannot be used. PPH multi high flow filter housing has a simple structure and is easy to install and maintain, which can help save a lot of space and equipment costs, so as to achieve cost-effective filtration.
 

Product Parameters

 

Housing Material	PPH(Polypropylene Homopolymer)
Housing Direction	Vertical
Filter Size	High Flow Cartridge 30" Length & 6" OD
Number of Cartridges	2 - 6pcs
Housing Thickness	22mm
Filtration Rating	1μm - 100μm
Inlet/Outlet Type	Flange
Inlet/Outlet Size	DN100
Sealing Type	Swing Bolt Cap With/Without Rocker Arm
Seal Material	Viton

 

 

Product Advantages

1. Thickness of PPH housing is up to 22mm, pressure resistance up to 10 bar
2. PPH Plastic multi high flow filter housing help to save a lot of space and equipment costs
3. According to the flow requirements, the multi high flow cartridge housing can be customized
4. PPH multi high flow cartridge housing is easy installation, low maintenance cost and labor saving
5. Longer service life, good sealing, larger flow, good dirt holding capacity and high filtration efficiency
6. Strong corrosion resistance, acid and alkali resistance, high temperature resistance and high strength

Application

1. Power Plant
2. RO Prefiltration
3. Water Treatment
4. Electronics Industry
5. Medical and Chemical
6. Electroplating Industry
7. Sea Water Desalination

Performance

Operation Data for PPH Multi High Flow Cartridge Filter Housing

 

Max. Temperature	90°C
Max. Pressure	145psi(10bar)
Liquid Flow Direction	Bottom in and bottom out
Flow Rate	2pcs 30" High Flow Cartridge: 45m³/h
	3pcs 30" High Flow Cartridge: 70m³/h
	4pcs 30" High Flow Cartridge: 90m³/h
	5pcs 30" High Flow Cartridge: 110m³/h
	6pcs 30" High Flow Cartridge: 135m³/h

 

Tech Support

Drawing of PPH Plastic Multi-Cartridge Filter Housing

 

1. The wall thickness of the filter housing is 22mm, with strong pressure resistance and long service life.
2. High flow multi-cartridge filter housing, good sealing, easy to install, maintain and replace the high flow filter elements.
3. Different numbers of high flow filter elements can be designed according to the required flow rate with high filtration accuracy.
4. Up to 6pcs high flow filter elements with 30inch length and 6" OD can be installed, and the maximum flow rate can reach 135m³/h.
5. Compared with the depth filter housing, the High flow multi-cartridge housing saves a lot of space and is economical and applicable.

PPH Plastic High Flow Filter Housing Production Workshop


1. Before use, be sure to clean all sealing rings and sealing ring fixing grooves of the filter, and then place the sealing ring naturally in the sealing ring fixing groove.
2. Place the filter bag into the mesh basket inside the filter, so that the ring of the filter is close to the filter barrel (for barrel wall-sealed filters) or the inner wall of the basket (for basket wall-sealed filters).
3. Place the filter bag pressure ring vertically above the filter bag ring and press the filter bag ring.
4. Place the inner pressure plate of the upper cover on the upper opening of the filter and press the sealing ring flatly.
5. Tighten the filter upper cover to the barrel clockwise.
6. Install the pressure gauge connector and install the pressure gauge.
7. Close the drain valve, open the liquid inlet and outlet valve, and start the pump.
1. Stop the pump operation, close the inlet and outlet valves, open the drain valve, and drain the liquid inside the filter.
2. Rotate counterclockwise to open the upper cover of the filter, and take out the inner pressure plate and filter bag pressure ring of the upper cover.
3. Take out the filter bag and clean all parts of the filter.
4. Reinstall the new filter bag and follow the above usage procedures.

It is strictly prohibited to open the upper cover of the filter while the equipment is running, otherwise it may cause serious casualties.

Hebei Macrokun Mesh Co., Ltd. was established in 2011 and is a professional supplier of screen printing and filtration products. Our main products include screen printing meshes, aluminum frames, screen printing squeegees, printing machines, etc. At the same time, we can also provide a series of filtration products such as filters, liquid filter bags, nut milk filter bags, tea bags, etc. We have a professional work team with many years of experience to help customers handle every problem properly. Our factory is located in Shijiazhuang City, Hebei Province, China, with advanced production equipment and a professional quality control department, which can provide customers with competitive prices and high-quality products. Our R&D department provides strong technical support, which enables us to accept some OEM and ODM projects.
Currently, our products have been exported to more than 70 countries and regions including the United States, Germany, Japan, the United Kingdom, Italy, Russia, Brazil, Turkey, Argentina, Pakistan, Thailand, Singapore, and Mexico.
We have won a good reputation from our customers with our excellent quality and service. We sincerely look forward to cooperating with all our customers and friends to achieve mutual benefit and win-win results, seek greater and better cooperation between us, and provide you with comprehensive and thoughtful services. You are welcome to visit the site for guidance.